Reina Imaging Introduces Line of NDT Accessories
Non-destructive testing performs tests and analyses to evaluate the properties, components and structure of a system or weld for characteristic differences and welding defects without causing any damage to the original part. NDT utilizes a wide array of testing methods such as acoustics emission, electromagnetic, laser, ground penetrating and leak testing, to name a few. Our line of protective NDT accessories focuses on radiographic testing via positioning and protecting the very expensive DR panel. Flat panel detectors, yet pricey and prone to damage, are a must have for any efficient radiographic DR field or lab work.
NDT Freedom 14×17 4 Handle Full Enclosure
The rough and tough nature of industrial radiographic testing can present many challenges. Whether the application is aerospace, petrochemical or any other industrial setting, the NDT 14×17 Freedom© 4 Handle Full Enclosure will help create a safe, efficient and consistent radiograph. With its ergonomic four handles, dense foam lined internal cavity and optional removable pipe cleats, the Freedom 4 full enclosure is a must-have when verifying welds or other tricky to position x-rays. The unibody construction, milled from a single piece of HDPE, yields both a high flexular modulus and superior heat deflection, all while boasting a lightweight design, just under 10lb. (4.5kg).
NDT Freedom 10×12 2 Handle Full Enclosure
The small format NDT 10×12 Freedom 2 Handle Full Enclosure effectively creates safe and consistent radiographs. With a handle located on each short axis, dense foam lined internal cavity and optional removable pipe cleats, the Freedom full enclosure is a must have when using an expensive DR panel in the field – verifying welds or other difficult x-rays. The unibody construction milled from a single piece of HDPE, yields both a high flexular modulus and superior heat deflection, all while boasting a lightweight design, weighing in at just under 5lb. (2.2kg). Tight spaces, tough angles and a variety of diameters are no problem with the optional removable positioning cleats. The Freedom Full Enclosure is a must have for the most challenging environments.
NDT Freedom Magnetic Mounting Kit
The Freedom Magnetic Mounting Accessory Kit helps attach the Freedom Case to any ferrous surface. The kit includes two mounting cleats and each cleat has two strong magnets on a swivel pin which allows for a variety of angled surfaces.
NDT Freedom Modular Accessory Mounting Kit with Cinch Straps
The Freedom Modular Mounting Accessory Kit helps attach the Freedom Case to a variety of pipes. The kit includes two mounting cleats and cinch straps that can attach to different size pipes.
NDT Freedom 14X17 Weight Distribution Cap
Speed, efficiency and consistency are key to a quality system that provide high output. The NDT Freedom 14×17 Weight Distribution Cap is used to protect the DR panel during bench work. It is rated up to 750lb. (340kg) of direct weight and features a low profile, openings for a tether in multiple locations and slip resistant feet. With its low OID, this cap delivers reliable protection and maintains the highest quality images.
NDT Freedom 14×17 4 Handle Full Enclosure
• Fully enclosed case with easy to remove back panel for detector access
• Foam lined internal cavity for extra DR panel protection
• Unibody construction for high flexular modulus and heat deflection
• Cutouts for tether in multiple panel orientations and configurations
• Four sure-grip fatigue reducing handles
• Lightbars for LED and cutout for PB
• Optional removable cleats that work with a variety of pipe diameters
• Total weight is under 4.5kg (9.9lb)
NDT Freedom 10×12 2 Handle Full Enclosure
• Full enclosure with easy to remove back panel for access to the detector
• Foam lined internal cavity for extra DR panel protection
• Unibody construction for high flexular modulus and heat deflection
• Cutouts for tether in multiple panel orientations
• Two sure-grip fatigue reducing handles
• Lightbars for LED and cutout for PB
• Optional removable pipe cleats that can work with a variety of diameters
• Total weight is under 5lb. (2.2kg)
NDT Freedom Magnetic Mounting Kit
• Easily attaches to any ferrous metal surface
• Ideal for surfaces at nearly any angle
• Simple bi-directional locks attach the magnetic kit to any size Reina NDT case
NDT Freedom Modular Accessory Mounting Kit with Cinch Straps
• Works with a variety of pipe diameters
• Simple bi-directional locks attach the mounting cleats to any size Reina NDT case
NDT 14X17 Freedom Weight Distribution Cap
• Rated up to 750lb of direct weight
• Scratch resistant opaque top
• Anti-slip feet
• Cutouts for tethers
